Setup & pairing for YESKAMO cameras
Add your first YESKAMO camera, connect to Wi-Fi, pair an NVR kit, and find the right user manual — step-by-step guides.
Getting a new YESKAMO camera online is usually a five-minute job once you know which add method matches your device. This section walks through first-time setup, Wi-Fi pairing, and adding cameras to a wireless NVR kit.
Tested with the YESKAMO app v4.9.7 (June 2026) on iOS and Android. Older firmware or the EseeCloud app may show slightly different menus.
Start here
- Set up your first YESKAMO camera — The QR scan, Cloud ID, and camera-hotspot add methods, step by step.
- Connect a camera to Wi-Fi — Why 2.4GHz matters, common pairing failures, and signal tips.
- Add a camera to an NVR kit — Pair cameras to a wireless system, add an extra add-on camera, and locate the NVR manual.
Before you begin
A few things speed up every setup:
- Charge or power the camera and wait for it to finish booting. Most battery and Wi-Fi cameras announce "Ready to connect" or "Waiting to connect" when ready to pair.
- Stand near your router during pairing, then move the camera to its final spot afterward.
- Know your Wi-Fi password and confirm you're on a 2.4GHz network — most YESKAMO Wi-Fi cameras do not join 5GHz bands.
- Check which app your camera uses. Some older models pair with EseeCloud instead of YESKAMO; the printed manual tells you which one to download.
If a camera came as part of a kit with a monitor or recorder, jump straight to Add a camera to an NVR kit.
YESKAMO App Docs