Setup & pairing for YESKAMO cameras

Getting a new YESKAMO camera online is usually a five-minute job once you know which add method matches your device. This section walks through first-time setup, Wi-Fi pairing, and adding cameras to a wireless NVR kit.

Start here

• Set up your first YESKAMO camera — The QR scan, Cloud ID, and camera-hotspot add methods, step by step.
• Connect a camera to Wi-Fi — Why 2.4GHz matters, common pairing failures, and signal tips.
• Add a camera to an NVR kit — Pair cameras to a wireless system, add an extra add-on camera, and locate the NVR manual.

Before you begin

A few things speed up every setup:

1. Charge or power the camera and wait for it to finish booting. Most battery and Wi-Fi cameras announce "Ready to connect" or "Waiting to connect" when ready to pair.
2. Stand near your router during pairing, then move the camera to its final spot afterward.
3. Know your Wi-Fi password and confirm you're on a 2.4GHz network — most YESKAMO Wi-Fi cameras do not join 5GHz bands.
4. Check which app your camera uses. Some older models pair with EseeCloud instead of YESKAMO; the printed manual tells you which one to download.

If a camera came as part of a kit with a monitor or recorder, jump straight to Add a camera to an NVR kit.