YESKAMO login & password recovery

If you searched for "yeskamo login", here is the important thing to know first: the YESKAMO Camera App does not use a single website-style account. You sign in to each camera or NVR with its Cloud ID and device password. This guide covers normal sign-in and what to do when you forget a password.

How "login" works in the YESKAMO app

1. Open the YESKAMO app and tap your device in the list to start the live view.
2. When prompted, the default user name is admin.
3. Enter the device password you set during pairing. On a brand-new device the password field may be blank or shown on the label.
4. Tap Confirm to connect.

If you added a device with Add manually, you typed the Cloud ID, the user admin, and the device password — those same values are your "login".

Forgot your camera or device password

YESKAMO does not store your device password on a server, so it cannot be emailed to you. Recovery means resetting the password on the hardware:

1. Find the Reset button on the camera or NVR (often a pinhole or a button under a rubber flap).
2. With the device powered on, press and hold Reset for about 10 seconds until it chimes or the status light changes.
3. The device returns to factory defaults: user admin with a blank or default password.
4. Re-add the device in the app and set a new, strong password right away.

Tips to avoid lockouts

• Write down your device password somewhere safe after pairing.
• Use the same admin password across cameras in one kit so an NVR can stream them.
• Older cameras may use the EseeCloud app instead of YESKAMO — check the camera manual for which app to install before assuming a login problem.

Still stuck after a reset? Reach out through our contact YESKAMO support guide.